+201149116399
call now
All System Parts
The linen discharge is set at the bottom of linen chutes to allow exiting of laundry. The door is held open by springs and fusible link(s), which will close in the event of fire preventing further spread of the fire through the chute. The door comes with slam latches as well. The bottom of a […]
Hand Operated Side Hinged 2 Hr Fire Rated by National Research Centre listed. Noiseless Self-Closing Intake Hopper Door mild steel, Stainless Steel. Interlocking and furnished with green & red indicator lamps. Side-hinged doors are highly recommended for linen chutes because they provide a larger accessible area for depositing bundles of soiled linen and significantly reduce […]
Hand Operated Bottom Hinged 2 Hr Fire Rated by National Research Centre listed. Noiseless Self-closing Intake Hopper mild steel, Stainless Steel. Interlocking and furnished with green & red indicator lamps. Bottom-hinged hopper-style doors are optimal for garbage chutes as they allow easy waste disposal while preventing spillage and litter overflow onto the floor. NFPA 82 […]
Glass bulb sprinklers (VK102) installed for fire detection inside the chute in each floor. Fire safety codes strictly require gravity chutes to be protected internally by automatic sprinklers. Specifically, sprinklers must be installed at or above the top chute intake, at alternate floor levels, and mandatorily at the lowest chute intake door. These sprinklers (usually […]
Factory fabricated vent unit as extension of chute with canopy.The primary purpose of the vent is to dissipate odors as well as hot gases in the event of a fire. NFPA codes require that the vent must be the full diameter of the chute, be open to the atmosphere, and extend at least 0.92 m […]
For each floor there is an intake throat as a support for intake door. A standard floor installation usually consists of two chute sections: one straight section and one section with the built-in intake throat. The intake throat is also the designated location for the intermediate sprinkler heads, which are normally installed in the top […]